Home>Small equipment>AR Heater Dental Composite Resin Material Warmer Equipment 3 Modes Two Uses New
|
AR Heater Dental Composite Resin Material Warmer Equipment 3 Modes Two Uses New
5.0
(3)
Copy and share this link on social network or send it to your friends
Copy
US$ 69.99
-
Customized Requirements
Product Description
Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
1- Light filter;
2- Heating plate;
3- Heating main body;
4- Resin base;
5- Temperature indicator;
6- Temperature selection and the on / off button;
7- DC power.
Operation
1. DC Plug the power adapter into the external socket to connect the power;
2. Green light is shining after the power supply the default temperature of 40 ℃;
3. One key operation, three temperature precise adjustable:
4. When the green light is standing, the temperature is 40 ℃;
5. Once again the key shows the yellow light shining, and the representative continues to heat until the yellow light is often bright and the temperature is 45 ℃;
6. Once again the key shows the red light shining, and the representative continues to heat until the red light is often bright and the temperature is 50℃
Temperature Light color Heating Reached the preset temperature
40℃ Green Shiny Green LED Green LED often bright
45℃ Yellow Shiny Yellow LED Yellow LED often bright
50℃ Red Shiny Red LED Red LED often bright
Notice:
Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;
The light slowly flashes when cooling down.
Cleaning and disinfection
All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
Not 135℃ sterilization.
Technical parameters
power adapter
Input : 100-240V AC 50/60Hz
Output : 12V 3A
Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
1- Light filter;
2- Heating plate;
3- Heating main body;
4- Resin base;
5- Temperature indicator;
6- Temperature selection and the on / off button;
7- DC power.
Operation
1. DC Plug the power adapter into the external socket to connect the power;
2. Green light is shining after the power supply the default temperature of 40 ℃;
3. One key operation, three temperature precise adjustable:
4. When the green light is standing, the temperature is 40 ℃;
5. Once again the key shows the yellow light shining, and the representative continues to heat until the yellow light is often bright and the temperature is 45 ℃;
6. Once again the key shows the red light shining, and the representative continues to heat until the red light is often bright and the temperature is 50℃
Temperature Light color Heating Reached the preset temperature
40℃ Green Shiny Green LED Green LED often bright
45℃ Yellow Shiny Yellow LED Yellow LED often bright
50℃ Red Shiny Red LED Red LED often bright
Notice:
Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;
The light slowly flashes when cooling down.
Cleaning and disinfection
All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
Not 135℃ sterilization.
Technical parameters
power adapter
Input : 100-240V AC 50/60Hz
Output : 12V 3A
You May Also Like
- Company Info
- Feedback
- Customer Reviews
- About Us
- Contact Us
- User Center
- Forget Password
- My Orders
- Tracking Order
- Register
- Shipping Policy
- shipping policy
- Contact Us
NAME: HECTOR ZHANG
TEL: +86 13949143611
+86 37155021976
WHATSAPP:+86 13949143611
EMAIL: info@orthdental.com
Any question, pls feel free to contact us.
Customer Reviews
2020-11-25
2020-09-30
2020-01-19